Metal Ceilings

Metal Ceiling System

Metal Ceiling System

Our metal ceiling system consists of decorative panel, bar buckle keel, light steel main keel and related accessories. The decorative panel includes Square Plate Modular Ceiling C-type Bar Buckle Ceiling, G-type Bar Buckle Ceiling and screen suspended ceiling. The width of buckle panel can be selected from 100mm, 150mm, 200mm, 300mm and 400mm, while the thickness is 0.45-1.2mm. The buckle panel is formed by roll forming and a maximum of length of 6000 mm can be achieved. The surface coating adopts electrostatic spraying, polyester paint spraying and roller coating. Cover coating can also be used in our product.

Our metal ceiling is parallel distributed and keeps a distance ridge. Since the height variation, our product could present a structured, dynamic three-dimensional effect. The ceiling system also offers an elegant, compact arrangement. Its unique, modern shape also distinguishes our product from others. Meanwhile, perforated panel or a sound insulation layer can be applied during the installation of the ceiling to provide sound insulation. You can also stick a layer of sound-absorbing cotton paper or black flame retardant cotton at the back of perforated panel to provide sound insulation as well. Since our product is fireproof, moisture resistant, eco-friendly and deformation-free, it is widely used in the bathroom, kitchen, toilets, shopping malls, office buildings, exhibition halls, station corridors of the, airport and other public places.

Types of Aluminum Ceiling Panel

Metal ceiling panel is a kind of decorative panel made from monolayer metallic material to act as the ceiling of a building. The raw material is formed and coated with protective and decorative coating, as well as oxide film and a plastic film. According to the type of surface treatment, metal ceiling panel can be categorized into spraying aluminum panel (FPT and YPT), roller coating aluminum panel, covered aluminum panel and anodizing aluminum panel. In terms of the raw material, the ceiling panel can be classified into aluminum and aluminum alloy panel, steel sheet panel, stainless steel panel and copper panel. In addition, according to the shape of ceiling panel, it can also be categorized into 4 types. The first one is slats, which is made from roll formed metal and metal composite. The second one is block board made from flat, rectangular metal and metal composite. The third one is grille panel, which is an integrated decorative panel. The grid is formed by a lot of blocks. The last one is a shaped board, which is made from shaped metal and metal composite.

Square Plate Modular Ceiling
The square plate modular ceiling varies in a lot structures and models. You can choose the best color, structure, function and so on. It could help designers to open their minds and express their innovations. The size can be chosen from 300 × 300,300 × 1200,400 × 400,500 × 500, 600 × 600, and 600 × 1200.

Hidden frame Modular Ceiling
Our hidden frame modular ceiling varies in a lot of specifications. Our product features a beautiful appearance, super three-dimensional visual effect, modern structure, easy installation and maintenance. It can be widely used in the supermarket, exhibition halls, banks, railway stations and other large places.

Installation Guide
1. Install the trim in the same height.
2. Install the main steel keel in an appropriate spacing, which is normally 1 to 1.2 meters. The spacing should be in accordance with the specification of steel keel.
3. The accessories pre-installed on the triangular keel, as well as triangular keel itself should be installed closely under main keel in vertical direction. The spacing of triangular keel should be in accordance with the specification. They should also be adjusted to level after installation.
4. Push the parallel edges of ceiling into the gap of triangular keel. You should install a row of ceiling first in the horizontal and vertical side, and make sure they are mutually perpendicular before mounting the rest of the ceilings.
5. Stitch the panels with another. You can press a little hard to fix them. The vertical and horizontal seams must be perpendicular.
6. You should wear gloves during the installation process. If you accidentally leave fingerprints or stains, you can easily clean them by diluted cleaners.

C-type Bar Buckle Ceiling
C-type of bar buckle ceiling product could offer you a stream-line appearance, easy installation, dozens of colors and easy customization. Our product includes flat panel and punching panel. The length could reach 6000mm, while the width can be selected from 75mm, 100mm, 150mm, 200mm and 300mm. No gap will occur with our product. Our product is widely used in office buildings, shopping malls, corridors and residential houses.

Installation Guide
1. Install the matting in the same height.
2. Install the parallel boom and connect them with the keel. You should carefully adjust the height and make sure they are level.
3. Push the parallel edges of ceiling into the gap of keel. You should make sure they are mutually perpendicular before mounting the rest of the ceilings.
4. You should wear gloves during the installation process. If you accidentally leave fingerprints or stains, you can easily clean them by diluted cleaners.

G-type Bar Buckle Ceiling
G-type aluminum ceiling is mainly made of high-grade aluminum alloy. Our product is made after cutting, rolling, roller coating and other special treatments in c-type devices. The ceiling varies in a lot of models and shapes. Meanwhile, multiple surface treatments can be used to fulfill various needs. Our product features an orthogonal structure. The surface color and specification can be chosen from G100mm, G200mm and G300mm, while both flat and punching models can be selected. Most of our product is 3 meters in length, and it could be at most 6 meters. We can also customize the size according to your requirements.

Installation Guide
1. Install the trim in the same height.
2. Install the parallel boom and connect them with the keel. You should carefully adjust the height and make sure they are level.
3. Push the parallel edges of ceiling into the gap of keel. You should make sure they are mutually perpendicular before mounting the rest of the ceilings.

You should wear gloves during the installation process. If you accidentally leave fingerprints or stains, you can easily clean them by diluted cleaners.

Cases of Metal Ceiling Panel

Panel Manufacturing Equipment

Metal Ceiling History

The Origin
Metal ceiling mainly comes from Europe and America. Aluminum ceiling, especially mainly aluminum-magnesium ceiling, is regarded as a luxury product with expensive price, thus it is rarely used in China. With the development of technology, the price of aluminum ceiling is becoming much appealing now.

Development History
Ceiling is mainly used in airports, railway stations, office buildings, shopping malls, subway stations and residential houses. Currently, the material of ceiling includes gypsum board, mineral wool board, PVC, and aluminum. The first generation product mainly adopts gypsum board and mineral wool board, while the second generation takes PVC, and later enhanced by UPVC, which is steel plate. The third-generation product is metal ceilings, including aluminum, aluminum alloy, steel, stainless steel, copper, etc.

Prospect
Since aluminum ceiling features a variety of models and rich colors, it is widely accepted by customers. In addition, aluminum ceiling also features a smooth appearance, fireproof, moisture resistance, easy installation, and so on. The designers and customers could choose the ceiling color according to the color of the furniture and floor. The technology for aluminum ceiling has been surveyed for a long time. Till now, roller coating and covered coating are also adopted in addition to spray coating. Therefore, the development of aluminum ceiling is promising.

Materials
1) Aluminum-magnesium alloy. This material also contains a part of the manganese to enhance the stiffness and strength. The material features a good antioxidant capacity. This is the ideal material for ceiling.
2) Aluminum-manganese alloy. The strength and stiffness of this material is slightly better than the aluminum-magnesium alloy, but it is also slightly weak in antioxidant capacity.
3) Aluminum alloy. Since less manganese and magnesium is added, the strength and stiffness are significantly lower than the aluminum-magnesium alloy and aluminum-manganese alloy. The antioxidant capacity is also normal.

Our company is a professional metal ceilings manufacturer and supplier in China. We provide a wide range of products, including aluminum composite panel / ACP, aluminum alloy roofing system, roll coating aluminum sheet, and more.

Related Names
Decorative Metal Ceiling System | Fireproof Home Ceiling Panel | Exhibition Hall Ceiling Material | Soundproof Ceiling for Airport

Feedback Form
Other Products